Nylon 66 hex head set screws with nylon dome nuts and Form A washers — pack of 5 complete sets

Nylon 66 Hex Head Set Screws with Dome Nuts & Washers — Pack of 5 Sets

10mm / M4 / 4mm
$10.50
Skip to product information
Nylon 66 hex head set screws with nylon dome nuts and Form A washers — pack of 5 complete sets

Nylon 66 Hex Head Set Screws with Dome Nuts & Washers — Pack of 5 Sets

NylonHexSet-DOME-M4-10MM
$10.50
By placing your order you agree to purchase from Global-e as the merchant of record, subject to Global-e’s Terms and Conditions and Privacy Policy, and share your information with Universal Hardware.

View store information

Nylon 66 Hex Head Set Screws with Dome Nuts & Washers — Pack of 5 Sets

10mm / M4 / 4mm

Hex head set screws in nylon 66 — fully threaded, to DIN 933 / ISO 4017 — supplied as a complete fixing set with nylon dome (acorn) nuts and Form A washers. Lightweight, non-conductive and corrosion-proof — the usual choice where a metal fastener would rust, short out, or mark the surface it clamps.

What's in the pack

Every pack contains 5 complete sets:

  • 5 hex head nylon 66 set screws
  • 10 nylon Form A washers — two per screw
  • 5 nylon dome nuts to DIN 1587

Sizes

M4 to M8, in lengths from 10mm to 70mm. Choose bolt size and length above.

Why a hex head

The six-sided head takes a spanner or socket, so you can hold the screw still while the nut goes on — far easier than a screwdriver slot on anything tightening against resistance, and there is no slot to burr or split. Paired with a dome nut it gives a clean finish at both ends.

Why a dome nut

The closed dome covers the thread end completely, removing the sharp edge and giving a finished look. The right choice on exposed work, anywhere hands or clothing pass, and where a protruding thread would snag.

Typical uses

Electrical and electronic assemblies, water and chemical exposure, aquariums and marine trim, model making and signage — anywhere a steel fastener would corrode or conduct. Nylon is softer than metal, so tighten by hand or with light tool pressure only.

Same sets with full hex nuts, wing nuts or flange nuts. Prefer a screwdriver slot? See the slotted cheese-head sets.

You may also like

All 199 parts

7mm Door Handle Spindle 30–150mm — Solid Steel Square Bar

7mm Door Handle Spindle 30–150mm — Solid Steel Square Bar

$9.00

Door Handle Spring Coil — 2 Turns, 1.8mm Thick

Door Handle Spring Coil — 2 Turns, 1.8mm Thick

$4.50

Polished Chrome Strike Plate 114mm — Double Long

Polished Chrome Strike Plate 114mm — Double Long

$9.00

Vintage Cabinet Knob 608 BR For Drawers — Old Brass

Vintage Cabinet Knob 608 BR For Drawers — Old Brass

$6.00

Hex Full Nuts M2–M10 — A4 Marine 316 Stainless DIN 934

Hex Full Nuts M2–M10 — A4 Marine 316 Stainless DIN 934

$6.00

Nyloc Lock Nuts M3–M10 — A2 Stainless Steel DIN 982

Nyloc Lock Nuts M3–M10 — A2 Stainless Steel DIN 982

$4.50

D-Shackle M4–M10 — A4 316 Marine Grade Stainless Steel

D-Shackle M4–M10 — A4 316 Marine Grade Stainless Steel

$6.00

Beech Curtain Rings 22–35mm Pole — Pack of 10 Rust-Proof

Beech Curtain Rings 22–35mm Pole — Pack of 10 Rust-Proof

$7.50