Penny / Mudguard Washers M3–M10 — A2 Stainless DIN 9021

Penny / Mudguard Washers M3–M10 — A2 Stainless DIN 9021

10 Units / M3 x 9mm
£3.50
Skip to product information
Penny / Mudguard Washers M3–M10 — A2 Stainless DIN 9021

Penny / Mudguard Washers M3–M10 — A2 Stainless DIN 9021

FAS-PENNYWASH-A2-10-UNITS-M3-X-9MM
£3.50

Why choose these Penny / Mudguard Washers

Our Penny / Mudguard Washers are pressed from A2 (18/8) stainless steel to DIN 9021 — the European standard for large-OD flat washers, also known as penny washers, repair washers or mudguard washers. The oversized outside diameter (typically two to three times the bolt diameter) spreads load over a much wider area than a standard form A washer, which makes them ideal for soft timber, plastic, sheet metal, oversized clearance holes, or repairing holes that have been enlarged or worn. A2 stainless gives excellent corrosion resistance for general indoor and outdoor use; for marine, coastal or chloride-rich environments, our matching A4-316 penny washers are the right choice.

Sizes available

Each washer is specified by bolt size × outside diameter. Use the variation selector to choose the exact combination you need:

  • M3 — 9mm or 12mm OD
  • M4 — 12mm, 16mm, 20mm or 25mm OD
  • M5 — 15mm, 20mm or 25mm OD
  • M6 — 18mm, 24mm or 30mm OD
  • M7 — 22mm OD
  • M8 — 24mm or 32mm OD
  • M10 — 25mm, 30mm or 40mm OD

Pack options

Each variant is available in packs of 10 or 20.

Typical uses

  • Spreading bolt load on softwood decking, fence posts, sheds and timber frames
  • Garden furniture, signage and outdoor metalwork where A2 stainless is sufficient
  • Mudguards, splashguards and vehicle body panels — the original “mudguard washer” application
  • Repairing or reinforcing enlarged, worn or oversized clearance holes in sheet metal or panels

How to fit

Place the penny washer between the work surface and the head of the bolt (or under the nut) before tightening, ensuring the bolt sits centrally in the washer’s clearance hole. Use one washer per bolt face — combining two undersized washers is not a substitute for a correctly sized penny washer. For long-term outdoor use, pair with A2 stainless bolts and nuts to avoid galvanic corrosion.

Delivery

Same-day dispatch on orders placed before 2pm, Monday to Friday. Free UK delivery on orders over £20. Tracked options available at checkout.

You may also like

All 199 parts

7mm Door Handle Spindle 30–150mm — Solid Steel Square Bar

7mm Door Handle Spindle 30–150mm — Solid Steel Square Bar

£5.95

Door Handle Spring Coil — 2 Turns, 1.8mm Thick

Door Handle Spring Coil — 2 Turns, 1.8mm Thick

£3.99

Polished Chrome Strike Plate 114mm — Double Long

Polished Chrome Strike Plate 114mm — Double Long

£5.95

Vintage Cabinet Knob 608 BR For Drawers — Old Brass

Vintage Cabinet Knob 608 BR For Drawers — Old Brass

£3.95

Hex Full Nuts M2–M10 — A4 Marine 316 Stainless DIN 934

Hex Full Nuts M2–M10 — A4 Marine 316 Stainless DIN 934

£6.95

Nyloc Lock Nuts M3–M10 — A2 Stainless Steel DIN 982

Nyloc Lock Nuts M3–M10 — A2 Stainless Steel DIN 982

£4.95

D-Shackle M4–M10 — A4 316 Marine Grade Stainless Steel

D-Shackle M4–M10 — A4 316 Marine Grade Stainless Steel

£3.95

Beech Curtain Rings 22–35mm Pole — Pack of 10 Rust-Proof

Beech Curtain Rings 22–35mm Pole — Pack of 10 Rust-Proof

£6.95